Okidata Oki
Xerox, Okidata Error Codes and How to Fix Them
Both Xerox and Okidata have taken the world by storm with their innovative technologies. However, there are still many error codes that baffle users. Here we discuss common error codes and their troubleshooting tips.
Error message: job canceled
This error message occurs when you have deleted a scan job before it could be completely transferred into the scanner’s database. Try resending the scan and make sure you do not delete the job.
Error message: failure in the remote directory’s lock
This error could happen because the folder with extension .ick was not removed properly after the scan. It could also occur if the destination disk is completely full. Maybe the directory or the volume for scan database has been incorrectly provided in the Xerox device. Try to remove the .ick folder and resend scan.
Error message: Invalid protocol
This type of error message occurs when the particular protocol has not been enabled inside the Xerox printer. You need to enable the particular protocol.
Error message: File transfer failure
This kind of error message happens when the network is down or if the disk is full or if the scan database path is incorrectly specified. You need to check the status of the network as well as amount of disk space.
Error message: system canceled job
This error message occurs when the sensors for the document handler is defective. It could also happen if these sensors have not been installed properly or if a person is lifting the edge of a large document from the trail sensor. You need to resend the scan and if the problem isn’t because of a person then it is definitely hardware or a setup issue.
Error code: 71
This error code in your Okidata device indicates it is a fuser error. Make sure to replace your fuser. Or else try checking the main board.
Error message: Error engine
This happens usually in the Oki Laser 400 series. Make sure to replace the ROM chip first. If this does not work, try replacing the circuit board of the engine controller.
Error code: 173
This error code means that the fuser temperature is low. You need to replace either the fuser or the thermistor inside the fuser.
Error message: fatal error 140
This error code 140 means the drum down and up process of the images are not functioning properly. The error code 140 means the error is with the yellow drum while 141 and 142 indicate problems with the magenta and cyan ones respectively. Try reseating the drums for image first. Then try reseating toner cartridges. You also will need to reseat the assembly for the sensor spring for the contact.
Error code: 020
This is another of the fatal error codes and indicates a power problem in the network. You need to make sure that the power cable is in direct connection with the outlet on the wall. You could also try replacing the cable or use a different network if this does not solve it.
About the Author
This Article is written by James Kara Murat from PrintCountry.com, the contributor of Printer Reviews. More information on the subject is at Xerox, Okidata Error Codes and How to Fix Them, and related resources can be found at Xerox Toner Cartridges.
Okidata C8800N Color Laser Toner Intallation
 |
 GENUINE OKI C5850 C5950 LASER TONER CARTRIDGES 4 CYMK  US $244.40
|
 OKI MICROLINE ML186 DOT MATRIX PRINTER PARALLEL BROKE US $.94
|
 OKI Microline 100 series Ribbons QTY 12 US $.99
|
 NEW HD Color OKI MFP Laser printer fax scanner C8550N US $399.00
|
 3 Dataproducts R6010 Ribbons for OKI 320 321 Printer US $3.50
|
 Okidata Printheads 5 for Okidata 320 Turbo printers US $9.99
|
 Okidata Grey Printer Knobs 10 for 320 Turbo printers US $9.99
|
 Oki Electric Industry MICROLINE 320 Turbo Workgroup US $10.00
|
 OKIDATA OKI FUSER UNIT C9200 C9200n C9200DXn C9400 US $184.75
|
 OKIDATA OKI 320 REFURB PRINTER ML320 No Top Plastics US $25.00
|
 OKI ML 321Turbo Printer Okidata 321T No Plastics Refurb US $99.00
|
 Okidata Microline 320TurboW USB OKI Refu Warnty GE7000A US $113.95
|
 OKI DATA 420 printheads LOT OF 10 6 month warranty US $349.00
|
 OEM OKI TONERS 41963001419630024196300341963004 US $50.00
|
 Oki Okidata c7000 7200 7400 Yellow Toner 41304205 C2 US $29.99
|
 OKI Microline 320 Turbo Dot Matrix Printer Parts Repair US $9.99
|
 Qty 3 New Okidata ML393 393C 393CPlus 395 395C Ribbon US $14.99
|
 NEW Oki Microline 320Turbo OldStk 90 day WarrGE7000 US $225.95
|
 NEW Oki Microline 320Turbo W USB OldStk 90 day Warr US $229.95
|
 Okidata MICROLINE 490 Dot matrix 24 Pin Printer US $149.99
|
 OKI ELECTRIC INDUSTRY LASER PRINTER C3400N OKIDATA US $140.00
|
 Dot Matrix 9 pin printer ESP Okidata US $20.00
|
 OKI MICROLINE® 395C Okidata Dot Matrix Printer US $100.00
|
 Oki Okidata C5100 C5300 42158601 PX714 5 120V US $12.50
|
 OKI DATA DIGITAL COMPACT COLOR PRINTER C58OO US $89.00
|
 Okidata Microline 320 Turbo 9 Pin Printer GE 7000A US $49.99
|
 Okidata 420 Parallel USB Dot Matrix Printer US $30.00
|
 OKI MICROLINE 321 TURBO 9 PIN PRINTER US $150.00
|
 OKI B8300 Series Toner Cartridge for 27000 Page Yield US $119.00
|
 Oki MICROLINE 490 Dot Matrix Printer US $75.00
|
 Brand New OKIDATA OKI 5650 FAX MACHINE OKIFAX US $200.00
|
 Okidata Microline 520 521 Nylon Ribbon US $.99
|
 New OkiLAN 6020e External Network Adapter 70036002 US $20.00
|
 Okidata Microline 320Turbo Oki Refurb WarrGE7000A US $105.95
|
 Okidata Microline 320TurboW Ser Oki Refurb WarrGE7000A US $95.95
|
 Printer Dot Matrix OKIDATA 320 Turbo n with USB US $99.99
|
 OKI Okidata Microline 320 Turbo 9 Pin Printer GE7000A US $9.99
|
 OKI B4300 Okidata Laser Printer Page count 38496 US $9.99
|
 OKI Okidata Microline 591 Dot Matrix 24 Pin Printer US $9.99
|
 OKI Okidata Microline 320 9 Pin Printer GE5293A US $9.99
|
| Powered by phpBay Pro |
 |
Okidata BANNER PAPER - 25 SHEETS ( 52207901 )
 |
 |
Microline 490 24-Pin Printer
|
 |
Microline ML186 Dot Matrix Printer (Parallel)
|
 |
Okidata Black Nylon Ribbon for Microline 320/321 Printers (5/6" x 2 Yards)
|
 |
Okidata ML420 Impact Printer
|
 |
Okidata Microline 320 Turbo 9-Pin Impact Printer
|
 |
CARRYING CASE
|
|
Transformer: 220/240V
|
|
|
OKI Microline 320/321 Turbo User's Guide (Revised)
|
|
|
OKI DATA INTRODUCES OKILAN 6100E+ PRINT SERVER.(Product Announcement): An article from: LAN Product News
|
|
 |
OKIcare Overnight Exchange Warranty Extension Program - Extended Service Agreement - 3 Years - Shipment (Q12097) Category: Extended Warranties and Service Plans
|
 |
Konica Minolta Extended Warranty Extended Service Agreement - 2 Years - On-site (823615) Category: Extended Warranties and Service Plans
|
|
Docbuilder Pro Kit for C9600 C9800
|
|
 |
OKI-Data Printer B410N Series To Use With EZ4473 Software
|